Page Writer TC30 CardiograPHiliph ECG Machine Network Card

PageWriter TC30 CardiograPHiliphhilip PHiliphhilip ECG Machine Network Card



About Network Settings

PageWriter TC ECG uses wired or wireless network connection or modem connection to communicate with various external servers. Among the network configuration settings available on the electrocardiograPHiliphhilip, all TCP/IP settings can be specified according to the needs of your specific clinical environment.
Both automatic IP addressing and fixed IP address setting are available via DHCP (Dynamic Host Configuration Protocol). The network settings on the ECG support the TCP/IP protocol using dynamic IP addresses or static IP addresses, and support DNS or WINS servers.
The Ethernet data transmission settings can be set to auto-negotiation, where the system automatically configures the correct settings for the Ethernet speed and mode (half-duplex or full-duplex), or can configure fixed settings as needed.
Network connection status window

Tap the LAN icon or wireless LAN icon on the status bar (top of the screen) to view more detailed information about the connection. The network connection status window appears.

The specifications in the following sections are applicable to the Summit wireless adapters that are offered as options for the PageWriter TC30 cardiograPHiliphhilip. Two options are available:




Summit SDC-CF20G Wireless Adapter (Option D21)

Length 72.8 mm (2.87 inches)
Width 43 mm (1.69 inches)

Thickness n Card body: 3.3 mm (0.13 inches) n

Antenna: 7.3 mm (0.29 inches)
Weight 21 grams (0.7 ounces)
System Interface 16-bit Compact Flash Type I with 50-pin connector
Antenna 0 dBi gain omnidirectional with diversity
Chipset Broadcom BCM4318E
Input Power Requirements 3.3 VDC +/- 5%

Typical Power Consumption (at maximum transmit power setting) n

• Transmit: 400 mA (1320mW) n

• Receive: 180 mA (594mW) n
• Standby: 10 mA (33 mW)

Operating Temperature -30 °C to 75 °C (-22°F to 167°F)

Operating Humidity 10 to 90% (non-condensing) Mounting 50-pin connector Network Standards IEEE 802.11b, 802.11g, 802.11i Frequency Band 2.4 to 2.4897 GHz Wireless Media n Direct Sequence-Spread Spectrum (DSSS) n Orthogonal Frequency Divisional Multiplexing (OFDM) Media Access Protocol Carrier sense multiple access with collision avoidance (CSMA/CA) Data Rates Supported n 802.11b (DSSS): 1, 2, 5.5, 11 Mbps n 802.11g (OFDM): 6, 9, 12, 18, 24, 36, 48, 54 Mbps

Modulation

1, 6, 9 Mbps: BPSK
2, 12, 18 Mbps: QPSK
5.5, 11 Mbps: CCK

24, 36 Mbps: 16-QAM

48, 54 Mbps: 64-QAM

Regulatory Domain Support n

• FCC (Americas, parts of Asia, and Middle East) n

• ETSI (Europe, Middle East, Africa, and parts of Asia) n

• TELEC (Japan)

Operating Channels n

• FCC: 11 (3 non-overlapping) n

• ETSI: 13 (3 non-overlapping) n

• TELEC: 14 (3 non-overlapping)

Transmit Power Settings

NOTE: Maximum transmit power will vary according to individual country regulations. All values nominal, +/-1.5dBm.

Security

Standards

• Wireless Equivalent Privacy (WEP) n
• Wi-Fi Protected Access (WPA) n
• IEEE 802.11i (WPA2)

Encryption n

• Wireless Equivalent Privacy (WEP, RC4 Algorithm) n

• Temporal Key Integrity Protocol (TKIP, RC4 Algorithm) n
• Advanced Encryption Standard (AES, Rijndael Algorithm)

Encryption Key Provisioning n

• Static (40-bit and 128-bit lengths)
• Pre-Shared (PSK) n
• Dynamic

802.1X Extensible Authentication Protocol Types n

• LEAP n
• EAP-FAST n
• EAP-TLS n
• PEAP-GTC n
• PEAP-MSCHAPv2

Compliance

ETSI Regulatory Domain n

• EN 300 328 n
• EN 301 489 n
• EN 60590 n
• EN 50371 n
• EU 2002/95/EC (RoHS)

FCC Regulatory Domain n

• FCC Subpart B,
• Class B n
• FCC Subpart C Part 15.247, 15.207 n
• ANSI C63.4-2003

TELEC Regulatory Domain n

• RCR STD – 33 n
• ARIB STD - T66 n

• ARIB STD T71

Summit SDC-CF22AG Wireless Adapter (Option D22)

Length 67 mm (2.64 inches)

Width 43 mm (1.69 inches)

Thickness 5 mm (0.2 inches)

Weight 28 grams (1 ounce)

System Interface 16-bit Compact Flash Type II with 50-pin connector

Antenna 0 dBi gain dual-band omnidirectional with diversity

Chipset Broadcom BCM4318E

Typical Power Consumption (at maximum transmit power setting) n

• Transmit: 400 mA (1320mW) n
• Receive: 180 mA (594mW) n
• Standby: 10 mA (33 mW)

Operating Temperature -30 °C to 85 °C (-22°F to 185°F)

Operating Humidity 10 to 90% (non-condensing)

Mounting 50-pin connector and standard compact flash rails

Network Standards IEEE 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i

Operating Channels n

• FCC: 11 (3 non-overlapping) n
• ETSI and KCC: 13 (3 non-overlapping) n
• TELEC: 14 (4 non-overlapping)

Security

Standards

• Wireless Equivalent Privacy (WEP) n
• Wi-Fi Protected Access (WPA), Personal and Enterprise n
• IEEE 802.11i, or WPA2, Personal and Enterprise

Encryption Protocols n

• Wireless Equivalent Privacy (WEP, RC4 Algorithm) n
• Temporal Key Integrity Protocol (TKIP, RC4 Algorithm) n
• Advanced Encryption Standard (AES, Rijndael Algorithm)

Encryption Key Provisioning (40-bit and 128-bit key lengths) n

• Static n
• Pre-shared via WPA-PSK or WPA2-PSK n
• Dynamic via EAP authentication

802.1X Extensible Authentication Protocol Types n

• LEAP n
• EAP-FAST n
• EAP-TLS n
• EAP-TTLS n
• PEAP-GTC n
• PEAP-MSCHAPv2

Compliance

ETSI Regulatory Domain n

• EN 300 328 n
• EN 301 489-1,
• EN 301 489-17
• EN 301 893 n
• EN 60950-1 n
• EN 50371 n
• EU 2002/95/EC (RoHS)

FCC Regulatory Domain n

• FCC Part 15.247 Subpart C n
• FCC Part 15.407 Subpart E