China World Technology Medical Equipment Service Group
China World Technology Medical Equipment Service Group Win-win together!
Add to Cart
M8086-66482 PHiliphhilip MP20 Patient Monitor Side Keypad Assemble Repair Part
PHiliphhilip IntelliVue MP20 and MP30 patient monitors adopt a compact design and provide powerful monitoring and basic measurement functions. It is very suitable for moderate care, outpatient surgery, postoperative care, environment with low severity of disease, and the process of patient transfer
Features For PHiliphhilip MP20/30
PHiliphhilip MP20 Specification
| Size | 345 x 275 x 230 mm (13.6 x 10.8 x 9 in) |
| Weight (with M3001A and battery, without options) | 6.0 kg (13.2 lb) |
Environmental Requirements
The use environment of MP20/MP30 monitors should be reasonably away from vibration, dust and corrosive or explosive gases. The environmental operating and storage conditions of MP20/MP30 monitors must be observed. If these conditions are not met, the accuracy of the system will be affected and damage may occur.
| Temperature | Humidity | Altitude
| |
| Operating | 0 to 40ºC (32 to 100ºF) | 20% to 85% Relative Humidity (RH) (non-condensing)
| 20% to 85% Relative Humidity (RH) (non-condensing)
|
| Storage | 0 to 40ºC (32 to 100ºF) | 20% to 85% Relative Humidity (RH) (non-condensing)
| -500m to 12000m (40000 ft.) |
Note :Use IntelliVue instrument telemetry and battery charging only at temperatures below 35°C (95°F)
Battery Storage
-20 to 50ºC (-4 to 122ºF)
Electrical and Safety Requirements
Safety requirements
If the M20/MP30 monitor is used for internal examination of the heart or brain, make sure that the monitor is connected to an equipotential grounding system.
Grounded
The MP20/MP30 monitor must be grounded during operation (Class I equipment in accordance with IEC 60601-1). If you do not have a three-wire outlet, you must consult a hospital electrician to ensure that it is properly grounded during installation. Do not try to use a three-wire to two-wire adapter on the MP20/MP30 monitor
Electrical requirements
Line voltage connection
MP20/MP30 monitors use <100 W (1.8 to 1.0 A).
Line voltage
MP20/MP30 monitor can operate in the AC line voltage range of 100 to 240V (50/60 Hz).
Claims for Damage
After receiving the equipment, if there is obvious PHiliphhilipysical damage or the monitor does not meet the specified operating requirements for patient safety inspection or extended self-inspection, please feel free to contact us. We will arrange to replace the instrument after confirmation.