China World Technology Medical Equipment Service Group
China World Technology Medical Equipment Service Group Win-win together!
Add to Cart
PHiliphh Goldway G and UT Series Integrated Adult Finger Clip SpO2 Probe Single Slot 5-pin 989803176921
► Brief Introduction
SpO2 is a measurement of oxygen saturation in the blood that uses an optical spectrophotometry technique. It is based on the differences in the absorption of red and Infrared light by oxygenated and de-oxygenated Hemoglobin. A pulse oximeter passes red and infrared light into an arteriolar bed and measures changes in light absorption during the pulsatile cycle. The light sources are red and infrared light emitting diodes (LEDs). A photo diode provides detection.
During systole, a new pulse of arterial blood enters the vascular bed, and both blood volume and light absorption increase. During diastole, blood volume and light absorption reach their lowest point. The measurement is based on the difference between maximum and minimum absorption, focusing on the pulsatile arterial blood. In addition to the oximetry function, the measurement can also provide the heart rate.
► Cleaning and Disinfectant
Use only the validated cleaning agents and disinfectants listed below. Using other agents may damage the sensor or its connecting wires, shorten product lifetime, or cause safety hazards. Select disinfectants carefully as some have very similar names but very different compositions. Never immerse the sensor connector in any of the cleaning solutions, disinfectants, or other liquids. The sensor and cable housing may be immersed, however. Never sterilize or autoclave the sensors.
Validated Cleaning Agents
Validated Disinfectants
To clean and disinfect the sensor:
1. Clean the sensor according to the instructions supplied with the cleaning agent.
2. Disinfect the sensor according to the instructions supplied with the disinfectant.
3. Wipe the exterior surfaces lightly. Do not allow liquids to come in contact with the power connector or switches or to penetrate connectors or openings in the monitor.
4. Dispose of any sensor showing signs of deterioration or damage.
► Environmental Specifications
| Temperature | Working | 10°C – 40°C (50°F – 104°F) |
| Storage and Transportation | -20°C – 55°C (-4°F – 131°F) | |
| Relative Humidity | Operating | ≤ 80% |
| Storage and Transportation | ≤ 95% | |
| Barometric Pressure | Working | 70 kPa – 106 kPa |
| Storage and Transportation | 50 kPa – 106 kPa |
► Qualitative Issues
The company has a professional division of labor, a highly cooperative team, strong medical device development technical force. Our expert team provides timely and reliable solutions for the sales and maintenance of patient monitors, defibrillators, ECG / ECG machines and other accessories or repair parts. We are committed to producing high quality products and providing first-class customer service. It is important to note that there are new and used products for sale. Please be careful when placing an order. Otherwise, it will cause unnecessary trouble. If you have any questions about product quality, please feel free to contact us. We will contact you as soon as possible.
► For More Services
In addition to the sales of medical devices, accessories and maintenance accessories, we also specialize in the maintenance of such machines and modules. As we are proficient in hospital equipment maintenance technology, we are good at renovating damaged machines and accessories. Therefore, if you have such machines or modules to repair, you can contact us and send them to us. We will repair them as soon as possible. But it's worth noting that you have to make sure that the items that need to be repaired are unopened and have never been repaired before. Otherwise, we can't accept it. To sum up, please check your items carefully before sending.
If you have other inquiry of PHiliphh Goldway G and UT Series Integrated Adult Finger Clip SpO2 Probe Single Slot 5-pin 989803176921 , please feel free to contact us.
We are always ready to serve you.