China World Technology Medical Equipment Service Group
China World Technology Medical Equipment Service Group Win-win together!
Add to Cart
6802-30-66765 Mindray T5 Patient Monitor Integral Module Frame Rack
Integral Module Rack
The patient monitors are available in two integrated modular racks: 2-slot and 5-slot. The control board contains a NIOS II FPGA. Realizes protocol conversion and infrared communication between host and parameter module
The module rack communication card can have 2 or 3 slots. The 3-slot communication card communicates directly with the motherboard. The 2-slot communication card is connected and controlled by the 3-slot communication card. The 3-slot communication card has a communication control function. The 2-slot communication card consists of an infrared circuit and a module power supply circuit. The RS422 driver board is located on the 3-slot communication board.
Removing the Integral Module Rack
Note: Do not forget the ground spring when assembling.
Module Rack Failures
| Symptoms | Possible Cause | Corrective Action |
| Integral module rack cannot identify parameter modules | Module failure | Replace the parameter module. If a new module is identified, the original module is defective. |
| Cable defective or poorly connected | 1. Check that the cables from the 3-slot module rack communication board to the MPM module rack communication board and from the module rack to the main board are properly connected. 2. Check that the connection cables and plugs are not damaged | |
| Wrong communication board software revision | Upgrade the program of the module or Integral module rack. | |
| Module (in some slots) unrecognized | Replace the corresponding module rack communication board. | |
| Power supply to integral module rack abnormal | 1. Check if voltage between two contact screws in any slot reaches 12VDC. If yes and the parameter module functions, PCB assembly in the SMR might fail. 2. If there is no 12V sent to the integrated module rack, check that power module output voltage to mother board reaches 12V DC. If yes, mother board might fail. | |
| 3-slot or MPM module rack communication board failure | Replace the 3-slot or MPM module rack communication board. | |
| Nios II module failure | Replace the Nios II module. | |
| Mother board failure | Replace the mother board. |
If you're interested in 6802-30-66765 Mindray T5 Patient Monitor Integral Module Frame Rack ,feel free to contact us .Thank you .