PN 6800-30-50491 Patient Monitor Module Mindray ICG Module For Mindray T5 T6

Patient Monitor Module Good working condition Mindray ICG Module PN 6800-30-50491 for Mindray T5 T6 Patient Monitor

Mindray ICG Module PN 6800-30-50491 for Mindray T5 T6 Patient Monitor

► Brief Introduction

The Mindray ICG Module PN 6800-30-50491 is an optional plugin module for the Mindray T5 and T6 patient monitors. The ICG module enables the measurement of cardiac output using the Impedance Cardiography (ICG) method.

ICG is a non-invasive method that measures changes in thoracic impedance caused by blood flowing through the heart. The ICG module works by transmitting a small electrical current through the patient's chest using adhesive electrodes. The resulting thoracic impedance waveform is analyzed by the module to calculate various cardiac parameters, including stroke volume, cardiac output, and systemic vascular resistance.

To use the ICG module, the patient must be connected to the module via the adhesive electrodes, and the module must be properly installed in the T5 or T6 patient monitor. The module will then begin to acquire data, and the cardiac parameters will be displayed on the monitor.

Users should note that ICG measurements are affected by patient positioning, lung disease, and other factors. Therefore, it is essential to follow the module's instructions and to interpret the results in conjunction with other clinical data.

► ICG Test

1. Connect the ICG simulator and the patient monitor using standard ICG cable and sensor.
2. Select [ICG setup]→ [Patient Demographics >>] and then input parameter values as follows:

   Height:	180 cm
   Weight:	75 kg
   CVP:	6 mmHg
   PAmean:	8 mmHg
   PAWP:	10 mmHg

3. Switch on the simulator and set as follows: HR=60±1 bpm, VI=61±4/1000s, TFC=32±2/kOhms. Then, start ICG monitoring.
4. After the measurement becomes stable and check that the measured results are as follows: HR=60±2 bpm, VI=61±4/1000s, TFC=32±2/kOhms.
5. Set on the simulator as follows: HR=70±1 bpm, VI=48±4 /1000s, TFC=32±2 / kOhms, and then start ICG monitoring. After the measurement becomes stable and check that the measured results are as follows: HR=70±2 bpm, VI=48±4 /1000s, TFC=32±2 / kOhms.

► About me

I have supply the Parts, Accessories and medical equipment of Patient Monitor, Defibrillator Machine, ECG Machine, Ventilator, Anesthesia Machine, Ultrasound such as

• GE,
• PHiliphhilip,
• Mindray,
• Goldway,
• Nihon Kohden,
• Med-tronic,
• Masima,
• Drager,
• Edan,
• Zoll,

etc.

► Ordering Information

Dear customers, to ensure the success of the transaction, please understand and agree to the following terms and conditions. You mainly need to get to know two important things. The first thing you'd better remember is to be patient with all the product images when you buy, so you can make sure that the item you're looking at is just what you're looking for and need to buy. This is absolutely necessary because product images also play an important role in product descriptions, which can help you understand the product more intuitively and in detail. The second thing is about the cost of customs. Please inform the buyer that all taxes and other duties are responsible. Therefore, before you pay for an order, you must check that the equipment you ordered is allowed to be imported into your country. That is, remember to read all relevant information before ordering.

Thank you for your time and interest in Mindray ICG Module PN 6800-30-50491 for Mindray T5 T6 Patient Monitor.

If you want to explore more details please let us know.

Any inquiry will be highly appreciated and thanks for your support.