
Add to Cart
Med-tronic PHYSIO CONTROL Lifepak 20e LP20e defibrillator REF 99507-000058 3202487-352 Used
PHYSIO CONTROL LP20e defibrillator REF 99507-000058 3202487-352
PHYSIO CONTROL LP20e defibrillator REF 99507-000058 3202487-352 introduction
The LIFEPAK 20e defibrillator/monitor (device) is a complete acute cardiac therapy system with manual and semi-automated defibrillation procedures. The device allows the operator to deliver short bursts of high-energy electrical impulses to a patient's heart when clinically needed. Operators can pre-configure devices to reduce complexity in normal operations.
The device has four primary functions:
■ Defibrillation
– Manual or semi-automatic defibrillation (DEA).
– Synchronized cardioversion in manual mode
– Lead detection for therapeutic electrodes and ECG
■ Non-invasive stimulation
– How demand and non-demand work
■ Save patient information
– Stores patient and device data for each event
- Real-time clock provides timestamps for events
– Prints the triggered event handler
■ Patient Signal Monitor - Displays up to two waveforms simultaneously
– Displays continuous pulse oximetry (SpO2).
– Displays a continuous reading of end-tidal carbon dioxide (EtCO2).
- Continuous heart rate display
- Show time and waveform detection indicators
– Monitors ventricular fibrillation/ventricular tachycardia and sounds a warning alarm
– Continuous printing of ECG data
The LIFEPAK 20e defibrillator/monitor has seven main operating modes:
Manual Mode
-Provides normal operating capability for ALS users
AED Mode
- Provides normal operating capability for BLS users
Archive Mode
- Allows operator to print, edit or delete previous patient records Setup Mode - Allows operator to configure the instrument
Service Mode
- Allows operator to execute device diagnostic tests and calibrations
Inservice Mode
- Provides simulated waveforms for demonstration purposes Auto
Test Mode
- Provides daily automatic tests of critical circuits
Power
AC Powered
| 100-120 VAC 50/60 HZ, 220-240 VAC 50/60 HZ. Total power draw less than 120 Volt-Amperes (VA), or less than 150 VA with the Code Management Module installed.
|
Battery Charging Time | Battery charges while defibrillator operates from AC power. Typical battery charge time of less than four hours when defibrillator is powered off and AC power is applied. |
Weight (maximum) | Basic defibrillator/monitor: 5.31 kg (11.7 lb) |
Height | 21.3 cm (8.4 in.) |
Width | 26.2 cm (10.3 in.) |
Depth | 26.2 cm (10.3 in.) |
Display Size | 115.18 mm (4.53 in.) wide x 86.38 mm (3.4 in.) high |
Display Type | 320 dot x 240 dot color LCD |
SpO2 Saturation range | 1 to 100% |
SpO2 Saturation Accuracy | 70–100% (0–69% unspecified) |
Thank you so much for your attention .If you're interested in Med-tronic PHYSIO CONTROL Lifepak 20e LP20e defibrillator REF 99507-000058 3202487-352 Used ,feel free to contact us .Thank you .