China World Technology Medical Equipment Service Group
China World Technology Medical Equipment Service Group Win-win together!
Add to Cart
Datex 5-Lead 10-Pin ECG Cable DLG-011-05
GE Datex 5-Lead 10Pins ECG Cable REF: DLG-011-05 Reusable New Compatible Medical Accessories For Sale
► Brief Description
Datex 5-Lead 10-Pin ECG Cable DLG-011-05 - Can monitor ECG for patients, mainly provides connection to the patient for measurement. However, do not attach it directly to the patient. Instead, connect it through electrode pads or gel as a medium. It is a 5-lead cable and is compatible with GE equipment. This cable can be reused, but please check it before each use. If there is any rupture or abnormality, please stop using it immediately. Please clean it regularly to keep the cable clean.
► Specification
| Product Category | ECG |
| Product Type | Cable |
| Number of Leads | 5 |
| Number of Pins | 10-Pin |
| Shielded | Yes |
| Color Coding | AAMI/IEC |
| Single-Patient Use OR Multi-Patient Use | Multi-Patient Use |
| REF | DLG-011-05 |
| Condition | New Compatible |
| Packaging Unit | 1 Pack = 1 Cable |
| Sterile OR Non-Sterile | Non-Sterile |
| Minimum Shelf Life | None |
| Warranty | 90 Days |
| Delivery Date | 3 - 5 Working Days |
Contact between electrodes and patient
Poor electrode-to-patient contact can result in poor signal quality and associated waveforms, as well as false alarm conditions. Poor contact may be caused by poor skin preparation, dry electrode gel, and/or defective ECG cables or lead wires. Therefore, it is necessary to ensure good contact between the electrode and the patient to achieve more accurate results. The specific matters are as follows:
1. After connection, the electrodes should not move in any way;
2. Periodically check whether the electrode is firmly adhered to the patient and in complete contact. If the electrode moves easily, it indicates that the electrode connection is too loose and may need to be replaced;
3. Tape the wire approximately 3-4 inches from the electrode, leaving slack in the wire to prevent it from pulling on the electrode.
Lead Selection
It is important to select the appropriate leads for the patient, showing the largest amplitude and cleanest signal so that the monitor can accurately detect the QRS complexes and R waves. Please follow the following when making your selection:
1. The QRS complex should be high and narrow (recommended amplitude > 0.5 mV);
2. The R wave should be above or below baseline (but not biphasic);
3. P wave should be less than (1/5) R wave height;
4. T wave should be less than (1/3) R wave height.
► Detailed Photos
Thanks for your interest in GE Datex 5-Lead 10Pins ECG Cable REF: DLG-011-05 Reusable New Compatible Medical Accessories, please feel free to contact me. Thank you for your time and wish you have a happy life.