Philiph TC10 ECG Machine 5-Wire Resistive Touch Screen E887802

Philiph TC10 ECG machine Touch Screen E887802

The Philiph TC10 electrocardiograph is a portable device that monitors and records electrocardiograms (ECGs). The touchscreen assembly (part number E887802) is the key interface for operating the device. If you are having trouble with your touchscreen or need more information about it, here are some general steps and tips.

► Touchscreen troubleshooting:

Calibration: If your touchscreen is unresponsive or inaccurate, it may need to be recalibrated. Refer to your user manual for calibration instructions.

Cleaning: Make sure your screen is clean and free of dirt, dust, and smudges. Use a soft, lint-free cloth and a cleaner that is safe for screens.

Restart the device: Turn off and restart the TC10 to see if that resolves the issue.

Check for damage: Check the screen for physical damage, such as cracks or scratches, that may affect its functionality.

Software updates: Make sure your device is running the latest firmware or software version. Contact Philiph support for updates.

Environmental factors: Avoid using your device in extreme temperatures or humidity as these may affect the touchscreen.

► Calibrating the touchscreen

You can calibrate your touchscreen at any time. Calibration may be recommended if you need several attempts to select items on the screen or if you have difficulty selecting items in certain areas of the screen. Calibrating the touchscreen may also be necessary if the ECG monitor is used in a different environment (sitting rather than standing) or by users with significantly different heights.

The touchscreen may need to be recalibrated to work optimally in a new setting or with a new user.

► To calibrate the touchscreen:

1 On any screen, simultaneously tap the Ctrl + Alt + C keys (on your keyboard). Or, tap the Settings button on the toolbar. (You may need to enter a password to access the Settings screen.) On the next screen, tap Set ECG Defaults. Tap the Maintenance Test button (at the top right of the screen), and then tap Calibrate and Test Touchscreen.

2 A white screen with a cross in the center will appear. Tap the intersection of the two center lines of the cross. Tapping the cross moves it to a new position. Tap and hold the center of the cross.

3 Tap the screen (when prompted) to end the test.

► Cleaning the Touchscreen

Your touchscreen may need to be cleaned from time to time. To clean the touchscreen, do the following:

1 Dampen a soft cloth with water or isopropyl alcohol.

2 Squeeze excess water from the cloth.

3 Wipe the touchscreen area. Allow the touchscreen to dry completely before using it again.

► Specification of Philiph TC10 ECG machine Touch Screen E887802

Thank you so much for your attention .If you're interested in Philiph TC10 ECG Machine 5-Wire Resistive Touch Screen E887802 ,feel free to contact us .Thank you .