China World Technology Medical Equipment Service Group
China World Technology Medical Equipment Service Group Win-win together!
Add to Cart
Stryker RemB Electric Sagittal Saw 6400-034-000 Good
► Brief Introduction of Stryker RemB Electric Sagittal Saw 6400-034-000 Good
The RemB Electric Sagittal Saw is compatible with the Integrated Operating Room Equipment (CORE) system.
The RemB Electric Sagittal Saw can be used with a variety of cutting accessories for surgical procedures involving cutting bone and hard tissue. These include, but are not limited to, applications in orthopedics, dentistry, ENT, neurosurgery and endoscopy.
The device can also be used with the Full Performance system.
► Specification of Stryker RemB Electric Sagittal Saw 6400-034-000 Good
| Product Name | Stryker RemB Electric Sagittal Saw 6400-034-000 Good
|
| Brand | Stryker |
| Model no | RemB Electric Sagittal Saw (REF 6400-034-000)
|
| Dimensions | 5.3 inch [135 mm] length 0.79 inch [20 mm] diameter
|
| Mass | 0.33 lb [0.150 kg] |
| Speed | 25000 cpm |
| Excursion | 5 degree arc |
| Mode of Operation
| Non-continuous Operation |
| Power Supply | Stryker CORE 2, CORE, or TPS Console 40 V
|
A Blade Mount
B Button
C Cord Receptacle
D Applied Part – The distal end of the handpiece and the cutting accessory (as defined by the Product Safety Certification standards listed in the Specifications section of the instructions for use supplied with the console.)
► To operate the Handpiece
Note: For more information on using the Handpiece , refer to the instruction manual included with the corresponding console.
1. Connect one end of the power cord to the Handpiece jack and the other end to the corresponding console jack.
2. Use the console to program the Handpiece operating parameters as needed.
3. Use the hand controller or the foot pedal to operate the Handpiece
Note: Use the console's touchscreen to assign different functions to the foot pedal as needed.
► To Install a Cutting Accessory
1.Insert the blade into the gap in the blade mount
2. Fully depress the button and seat the blade against the post.Release the button
3.Rotate the blade against the post until it snaps into the desired location. If necessary, depress the button again to reposition the blade.
4. Gently tug the blade to verify the blade is secure.
5. To index the blade mount, pull out and rotate the blade mount until it snaps into the desired location.
NOTE: The blade mount will index in 45-degree increments, or eight possible locations.
Thank you so much for your attention .If you're interested in Stryker RemB Electric Sagittal Saw 6400-034-000 Good For Repairing ,feel free to contact us .Thank you .